.png)
.png)
Club dei Riparatori / Blade pumps
.jpg)
products
CDR.0787
Electric motor, for Blade pump, 240V-50Hz, 187W, IP54
CDR.0788
Brass blade pump, 10bar, 100l/h
The pump must NEVER work without liquid
We recommend using an inlet filter
DO NOT operate at temperatures lower than 8°C
At the end of the work it is necessary to flush the pump with water only
The pump must NEVER work without liquid
We recommend using an inlet filter
DO NOT operate at temperatures lower than 8°C
At the end of the work it is necessary to flush the pump with water only
CDR.0789
Blade pump made of stainless steel, 10bar, 100l/h. Complete with fitting clamp
The pump must NEVER work without liquid
We recommend using an inlet filter
DO NOT operate at temperatures lower than 8°C
At the end of the work it is necessary to flush the pump with water only
The pump must NEVER work without liquid
We recommend using an inlet filter
DO NOT operate at temperatures lower than 8°C
At the end of the work it is necessary to flush the pump with water only
The winning solution to manufacture and repair all kinds of pressure washers
